2.6.1.
Boot.Device.Priority
Boot
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
1st.~.xxth.Boot.Device.[xxx.Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
Configuration options: [1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM]
[Disabled]
2.6.2
Boot Settings Configuration
Boot
Boot Settings Configuration
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait For 'F1' If Error
Hit 'DEL' Message Display [Enabled]
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
2-34
[1st FLOPPY DRIVE]
[Hard Drive]
[ATAPI CD-ROM]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Auto]
[Enabled]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS SETUP UTILITY
Specifies the boot
sequence from the
available devices.
A device enclosed
in parenthesis has
been disabled in
the corresponding
type menu.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 2: BIOS setup