GE
Lighting
Tetra
PowerGrid - Gen 3
®
LED ARCHITECTURAL SERIES
Product Codes
93013528, 93013522, 93013523, 93013524
LED System Features
• Certified to UL 2108
• Low-Voltage Luminaire (24 VDC)
• IP54, dry or damp location rated.
• Compatible with 24 Volt GE LED Drivers
• Dimmable with GE 0-10V Dimming LED Driver or GE
Dimming Module and compatible dimming controller
For use in the following applications
• Backlighting
• Illuminated Walls or Ceilings
Save These Instructions
This product is intended solely for the use of non-
residential architecture lighting and is not intended for
use in any other applications.
imagination at work
BEFORE YOU BEGIN
Read these instructions completely and carefully
WARNING/AVERTISSEMENT
Risk of electrical shock. Disconnect power before servicing or
installing product.
Risque de choc électrique. Couper l'alimentation avant le
dépannage ou avant l'installation du produit.
Prepare Electrical Wiring
Electrical Requirements
• Do not use in wet locations.
• The grounding and bonding of the LED Driver shall be
done in accordance with National Electric Code (NEC)
Article 600.
• Follow all National Electric Codes (NEC) and local codes.
Installation Guide