Summary of Contents for Honeywell Greenheck MS4120
Page 1
These instructions apply to the external field installation of Honeywell actuators on Greenheck model VCD control dampers when they are duct mounted or sleeved.
Page 2
Instructions Secure the thread stud to actuator bracket with #10- 24 nut. Verify that the damper is in its fail position. These installation instructions assume the damper is already Secure actuator to the damper shaft by torquing the mounted in a duct or sleeve with the damper shaft extending screw on the actuator universal clamp to 88 in.
This manual is also suitable for:
Greenheck ms4620Greenheck ms8110Greenheck ms8120Greenheck ms7510Greenheck ms7520Greenheck ms4120f1006...
Show all