Page 1
Installation and Instruction Manual CM Series 10″ Subwoofer CM - 510ST http://pioneerproaudio.com For installation and other support information, visit the above site.
Introduction Thank you for purchasing this product. Be sure to read the "Read Before Use" before using this product. Also, read the Installation and Instruction Manual from the support site that can be viewed from the URL or QR code given here. You may require the Installation and Instruction Manual in future, so keep them carefully at a safe location.
Page 3
Take precautions to prevent excessive humidity when rapidly to prevent the loudspeaker from slipping off the stage. The vibrations heating or cooling the room with an air conditioner or heater. of the subwoofer can cause other loudspeakers to shift from their designated locations, so keep in mind the danger of such loudspeakers Do not place the loudspeaker near a window, etc.
1 2 3 4 Checking the Accessories • 4-pin Euroblock connector × 1 Power amplifier or Next speaker previous speaker Euroblock connector Next speaker 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 • Precautions for use, 1 unit Power amplifier 1 2 3 4...
Page 5
3 Use a flat-bladed screwdriver to turn the input selection switch 3 on the back of the loudspeaker, and then select the transmission method (100 V / 70 V / 8 Ω) and input wattage. 70 V 100 V 25 W 50 W 50 W 100 W...
Other Specifications CM-510ST Loudspeaker Type Kelton method subwoofer Frequency response (- 10 dB, Typical) 45 Hz – 150 Hz Sensitivity (1 W / 1 m) 95 dB (half space) 8 Ω Nominal Impedance Power Handling (RMS*1/ Program) 200 W / 400 W 70 V 200 W / 100 W / 50 W / 25 W Transformer taps...