Page 1
HUPF Series Gas pressure regulator with incorporated filter HUPF Series GAS PRESSURE REGULATOR WITH INCORPORATED FILTER INSTRUCTION SHEET DESCRIPTION Spring-loaded regulator with inlet pressure compensation and zero shut-off. The outlet pressure is kept constant with changing gas flow as a function of the spring setting. The zero shut-off prevents the outlet pressure from increasing when there is no gas flow through the regulator.
No gas leakage into Capacity the environment of over 30dm3/h is possible. The above in See Capacity curves HUPF Series on page 6. compliance with para. 3.3.2. of UNI EN 88 specification. Maximum working pressure...
Maintain a distance of at least 50 Spray all pipe connections and gaskets • with a good quality gas leak detection Note: In case of the HUPF Series, the distance spray. between the bottom and the ground must Start the appliance and check for •...
Page 4
HUPF Series Gas pressure regulator with incorporated filter Governors with built in filter Max. operating Overall dimensions (mm) Connection pressure Model (inch) (mbar) HUPF015B110 1/2" 1/2" HUPF020B110 3/4" 3/4" HUPF025B110 1" 1" HUPF032B110 1"1/4 1"1/4 HUPF040B110 1"1/2 1"1/2 HUPF050B110 2"...
HUPF Series Gas pressure regulator with incorporated filter ADJUSTMENTS Caution • Adjustments must be made by qualified personnel only! Outlet pressure adjustment (Tolerance: better than 15% of outlet pressure setting) 1. Remove the upper cap (1). 2. To obtain the required outlet pressure value, turn the set screw (4).
Page 6
1000 Nominal flow rate (m3/h) Honeywell Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Sàrl, 1180 Rolle, Z.A. Lá Piece 16, Switzerland by its Authorized Representative: Automation and Control Solutions Combustion Controls Europe Honeywell BV...
This manual is also suitable for:
Hupf015b110Hupf020b110Hupf025b110Hupf032b110Hupf040b110Hupf050b110...
Show all